
General Microscope Accessories
General accessories for use with microscopes. Products include lens oil, lens cleaner, slide dispensers, microscope covers, vessel holders, light cubes, and flow cells.
Many parts of your microscope can be updated or replaced including microscope lamps, lenses, and eyepieces. Replacement lamps, light sources, and power cords can extend the working lives of your microscopy equipment. New or replacement objectives and lenses can help increase the total magnification available with your microscope.
Add greater magnification or exchange your eyepiece for one with a reticule to more easily estimate the sizes of the items being viewed.
Replace or update your mechanical stage or clamps or add cell culture vessel adapters to facilitate specimen positioning.
Condensers can also be replaced, and conversion kits are available to add phase contrast, polarization, fluorescence, or other capabilities to your current system.
Some microscopes can be adapted for use with still or video cameras. Look for cameras and adapters designed for your specific microscope brand. Film and documentation-related products may also be available to support your record-keeping.
Temporary, semi-permanent, and more long-term slide storage options include:
- Slide racks that securely hold slides during staining procedures
- Folding fiberboard or plastic slide holders with horizontal indentations that keep microscope slides in place
- Slide storage boxes with vertical dividers; made from fiberboard, plastic, and wood and available in multiple sizes
- Slide holders and mailers for transporting slides safely
- Slide storage systems and cabinets for large quantities of slides or archival storage
- (1)
- (1)
- (1)
- (3)
- (3)
- (4)
- (2)
- (1)
- (4)
- (3)
- (1)
- (1)
- (1)
- (5)
- (2)
- (9)
- (1)
- (1)
- (1)
- (1)
- (1)
- (1)
- (1)
- (1)
- (1)
- (1)
- (1)
- (1)
- (1)
- (1)
- (1)
- (16)
- (5)
- (6)
- (2)
- (1)
- (1)
- (1)
- (9)
- (1)
- (1)
- (1)
- (4)
- (1)
- (1)
- (3)
- (1)
- (1)
- (1)
- (1)
- (5)
- (5)
- (2)
- (1)
- (10)
- (2)
- (1)
- (1)
- (1)
- (1)
- (2)
- (1)
- (2)
- (6)
- (1)
- (5)
- (1)
- (1)
- (2)
- (1)
- (1)
- (1)
- (1)
- (2)
- (2)
- (1)
- (1)
- (2)
- (1)
- (1)
- (1)
- (1)
- (1)
- (1)
- (1)
- (1)
- (2)
- (1)
- (1)
- (12)
- (1)
- (1)
- (1)
- (2)
- (1)
- (2)
- (1)
- (1)
- (4)
- (6)
Filtered Search Results

Electron Microscopy Sciences Kellner Wide-Field Eyepiece, X10
Small and Specialty Supplier Partner
Small and/or specialty supplier based on Federal laws and SBA requirements.
Learn More

Small and/or specialty supplier based on Federal laws and SBA requirements.
Learn More
Focusing eyepiece with high eye point (useful for spectacle wearers). Non -focusing wide field.

Non-distribution item offered as a customer accommodation; additional freight charges may apply.
Learn More
Electron Microscopy Sciences Cambridge S4 Mark II, S-410 Pin Stub 1-1/2" head, 3/16" height, Carbon
Small and Specialty Supplier Partner
Small and/or specialty supplier based on Federal laws and SBA requirements.
Learn More

Small and/or specialty supplier based on Federal laws and SBA requirements.
Learn More
Scanning electron microscope specimen mounts for Cambridge S4, Mark II, and S-410. Made from spectroscopically pure carbon.
Head: 1-1/4"
Height: 3/16"

Non-distribution item offered as a customer accommodation; additional freight charges may apply.
Learn More
Electron Microscopy Sciences Carbon Support Film 5-6 nm thick on Square 200 mesh Copper Grid
Small and Specialty Supplier Partner
Small and/or specialty supplier based on Federal laws and SBA requirements.
Learn More

Small and/or specialty supplier based on Federal laws and SBA requirements.
Learn More
A thin film of pure carbon. All of our coated grids are optically checked followed by batch testing in the EM. Packed in grid storage box. NOTE: All of our film is laid on the shiny side of the grid. Standard thickness is 5-6 nm.
Grid: Copper

Non-distribution item offered as a customer accommodation; additional freight charges may apply.
Learn More
Sigma Organic Chemistry Crotonaldehyde, predominantly trans | 5ML | 123-73-9 | MFCD00007003
CAS #: 123-73-9
MDL #: MFCD00007003
Purity: >99 %
UNSPSC Code: 12352100
Molecular Weight: 70.09

Non-distribution item offered as a customer accommodation; additional freight charges may apply.
Learn More
Essendant HYGEN 48-72"" Quick-Connect Ergo Adjustable Handle, Black/Yellow
Lightweight, non-magnetic aluminum construction. One-step connecting mechanism speeds mop assembly and changeover. User-friendly bend and grip make handle more comfortable to use.

Non-distribution item offered as a customer accommodation; additional freight charges may apply.
Learn More
Mitegen Goniometer base type B5-R, MicroRT compatible; package of 20
Small and Specialty Supplier Partner
Small and/or specialty supplier based on Federal laws and SBA requirements.
Learn More

Small and/or specialty supplier based on Federal laws and SBA requirements.
Learn More
Reusable Glue-Free Magnetic Bases/Caps for holding crystal loops. (SPINE Style) Fully compatible with ALS style robotic sample changers. Unique design compatible with MicroRT™ capillaries for room temperature screening and crystal dehydration studies. Can be used with all crystal mounts/loops, including MicroMounts™ , MicroLoops™ , MicroGrippers™ and MicroMesh™ . *Reusable Bases are compatible only with MiTeGen Brand Mounts and Loops.

Non-distribution item offered as a customer accommodation; additional freight charges may apply.
Learn More
Mitegen Goniometer base type B1A-R, MicroRT compatible; package of 40
Small and Specialty Supplier Partner
Small and/or specialty supplier based on Federal laws and SBA requirements.
Learn More

Small and/or specialty supplier based on Federal laws and SBA requirements.
Learn More
Reusable Glue-Free Magnetic Bases/Caps for holding crystal loops. Fully compatible with ALS style robotic sample changers. Unique design compatible with MicroRT™ capillaries for room temperature screening and crystal dehydration studies. Can be used with all crystal mounts/loops, including MicroMounts™ , MicroLoops™ , MicroGrippers™ and MicroMesh™ . *Reusable Bases are compatible only with MiTeGen Brand Mounts and Loops.

Non-distribution item offered as a customer accommodation; additional freight charges may apply.
Learn More
Electron Microscopy Sciences BEEM Cap Holder Set Multi Task
Small and Specialty Supplier Partner
Small and/or specialty supplier based on Federal laws and SBA requirements.
Learn More

Small and/or specialty supplier based on Federal laws and SBA requirements.
Learn More
The Multi-Task BEEM Capsule Holder is designed to hold size "00" BEEM capsule during resin polymerization. Use whenembedding and polymerizing resin by microwave under water. The direct contact of the microwave energy to the resin causes the resin to heat to quick and leads to micro bubbles inside the resin block and possible damage to the tissues. This is eliminated by immersing the resin capsule in a water bath during microwaving. This indirect contact' of microwave energy to the resin will help the embedding block polymerize nicely and homogeneously and avoids the overheating of the tissue.
Mold is machined from polyethylene block, comes in two parts: bottom part which holds the BEEM capsule, and the second part which is placed on top and is securd by two plastic screws to ensure the BEEM capsules are in place and capsule lid will not pop out during under water polymerization or microwave irradiation.

Non-distribution item offered as a customer accommodation; additional freight charges may apply.
Learn More
Electron Microscopy Sciences Double Cross Lines Reticle RET 60, 19 mm, 0.025 mm Gap
Small and Specialty Supplier Partner
Small and/or specialty supplier based on Federal laws and SBA requirements.
Learn More

Small and/or specialty supplier based on Federal laws and SBA requirements.
Learn More
High quality, precision made standard reticles are manufactured to use with our microscope eyepieces. All recticles are chrome on glass and positive polarity.
Size: 19 mm
Gap: 0.025 mm

Non-distribution item offered as a customer accommodation; additional freight charges may apply.
Learn More
Electron Microscopy Sciences Double Cross Lines Reticle RET 65, 21 mm, 2.0 mm Gap
Small and Specialty Supplier Partner
Small and/or specialty supplier based on Federal laws and SBA requirements.
Learn More

Small and/or specialty supplier based on Federal laws and SBA requirements.
Learn More
High quality, precision made standard reticles are manufactured to use with our microscope eyepieces. All recticles are chrome on glass and positive polarity.
Size: 21 mm
Gap: 2.0 mm

Non-distribution item offered as a customer accommodation; additional freight charges may apply.
Learn More
Electron Microscopy Sciences Broken Cross Line Reticle RET 50, 19 mm, 63 µm Line width
Small and Specialty Supplier Partner
Small and/or specialty supplier based on Federal laws and SBA requirements.
Learn More

Small and/or specialty supplier based on Federal laws and SBA requirements.
Learn More
High quality, precision made standard reticles are manufactured to use with our microscope eyepieces. All recticles are chrome on glass and positive polarity.
Size: 19 mm
Line width: 63 µm

Non-distribution item offered as a customer accommodation; additional freight charges may apply.
Learn More
Electron Microscopy Sciences Indexed Grid Reticle RET 83, 19 mm, 5 mm x 5 mm Scale, 1 mm squares Divisions
Small and Specialty Supplier Partner
Small and/or specialty supplier based on Federal laws and SBA requirements.
Learn More

Small and/or specialty supplier based on Federal laws and SBA requirements.
Learn More
High quality, precision made standard reticles are manufactured to use with our microscope eyepieces. All recticles are chrome on glass and positive polarity.
Size: 19 mm
Scale: 5 mm x 5 mm
Divisions: 1 mm squares
Line width: 10 µm

Non-distribution item offered as a customer accommodation; additional freight charges may apply.
Learn More
Electron Microscopy Sciences Double Cross Lines Reticle RET 64, 21 mm, 1.0 mm Gap
Small and Specialty Supplier Partner
Small and/or specialty supplier based on Federal laws and SBA requirements.
Learn More

Small and/or specialty supplier based on Federal laws and SBA requirements.
Learn More
High quality, precision made standard reticles are manufactured to use with our microscope eyepieces. All recticles are chrome on glass and positive polarity.
Size: 21 mm
Gap: 1.0 mm

Non-distribution item offered as a customer accommodation; additional freight charges may apply.
Learn More
Electron Microscopy Sciences Double Cross Lines Reticle RET 62, 19 mm, 0.125 mm Gap
Small and Specialty Supplier Partner
Small and/or specialty supplier based on Federal laws and SBA requirements.
Learn More

Small and/or specialty supplier based on Federal laws and SBA requirements.
Learn More
High quality, precision made standard reticles are manufactured to use with our microscope eyepieces. All recticles are chrome on glass and positive polarity.
Size: 19 mm
Gap: 0.125 mm

Non-distribution item offered as a customer accommodation; additional freight charges may apply.
Learn More
Electron Microscopy Sciences Indexed Grid Reticle RET 80, 19 mm, 10 mm x 10 mm Scale, 0.5 mm squares Divisions
Small and Specialty Supplier Partner
Small and/or specialty supplier based on Federal laws and SBA requirements.
Learn More

Small and/or specialty supplier based on Federal laws and SBA requirements.
Learn More
High quality, precision made standard reticles are manufactured to use with our microscope eyepieces. All recticles are chrome on glass and positive polarity.
Size: 19 mm
Scale: 10 mm x 10 mm
Divisions: 0.5 mm squares
Line width: 25 µm

Non-distribution item offered as a customer accommodation; additional freight charges may apply.
Learn More